raf pali
Forum Replies Created
-
AuthorPosts
-
raf pali
ParticipantIt is just a triangular vertical surface ( you can move the points into any plane that you want ) you can add as many points around the triangle and move them to make it the shape that you want to fit your hull profile.
Hi to you all.
I would much appreciate your kind help if you would share the “triangular technique” for bulkhead’s placement. So far I’ve used one face of an added box. How dos that sound? Am I on the right track?
Regardsraf pali
ParticipantHi Dinga. The printing tool for developed plates is only available in the pro version but there is a way out. See this.
Cheers
http://www.delftship.net/delftship/index.php/forum/hull-modeling/2624-plate-developments-in-dxf-convert-to-pdf-for-full-size-printing?limit=6&start=6#2653raf pali
Participantim trying to create layers so i can have individual panels for a cutting list.
regards Ben
Click on the new layer command found on the layer section on the toolbar… the one in the middle with a little green plus sign on it.
raf pali
Participantraf pali
Participant -
AuthorPosts
Your account
Recent Topics
-
Modeling the 1907 U.S. Brigantine Galilee
by
Terrance Egolf
1 month ago -
install problems
by
tcurdt
1 month ago -
VCG and GM of Smit Rotterdam
by
DuncanH
1 month ago -
Revision/save history?
by
Jamie
1 month, 1 week ago -
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
3 months, 2 weeks ago -
Cylinder through curved deck
by
RuudN
3 months, 2 weeks ago -
Exporting table of offsets
by
Peter Mitchell
4 months, 2 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
4 months, 2 weeks ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
4 months, 3 weeks ago -
Deck Camber
by
patmat41959
4 months, 3 weeks ago