Martin

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 37 total)
1 2 3
  • Author
    Posts
  • May 21, 2018 at 13:48 in reply to: Bug report #39244
    Martin
    Participant

    I have a problem with lines plan too. But:
    … my CAD cannot open dxf file when I save it as AutoCAD 2012
    … my CAD can open only if I choose older version of AutoCAD Dxf
    … COREL can import any version of dxf file with lines plan

    May 21, 2018 at 13:43 in reply to: Lines Plan DXF and PDF #39243
    Martin
    Participant

    What is a problem? Save to dxf in Delftship or open it in any CAD?

    December 30, 2017 at 11:13 in reply to: Czech translate … bug? #39097
    Martin
    Participant

    I have another “bug”. You can look at image. Czech translation above red line is incorrect. The right translation is “Boční” but letter “č” is changed to “è”. It is right in translation file. And also another czech word with “č” (green underline) is correct.

    So my conclusion: In toolbars is everything right but there is something wrong in “work space” .

    Attachments:
    December 19, 2017 at 15:13 in reply to: Czech translate … bug? #39083
    Martin
    Participant

    I don’t want to start new thead so I use this one.

    I cannot switch Appearance. I can choose one and it switches but after restart I have again default (white).

    July 12, 2017 at 21:07 in reply to: Czech translate … bug? #38954
    Martin
    Participant

    File of Czech translation is here: Czech_301.lng

    November 14, 2016 at 18:27 in reply to: New to DS having trouble with Intersect #38607
    Martin
    Participant

    I have downloaded your file and use Intersect function (in menu Home –> Point –> Intersect). All works well. So I don´t fully understand your problem with using this function.

    July 1, 2016 at 11:35 in reply to: DelftSHIP 8.08 #38406
    Martin
    Participant

    your welcome. 😉

    June 27, 2016 at 13:23 in reply to: DelftSHIP 8.08 #38404
    Martin
    Participant

    It seems last update has solved all problems with translation.

    Thanks. :laugh:

    April 7, 2016 at 18:39 in reply to: DelftSHIP 8.08 #38242
    Martin
    Participant

    I have another remark. When I tried to translate last working version of Czech (for DS 281) and only I save (without any translation) a file with translation then lines plan stopped to work and the error showed.

    April 6, 2016 at 01:35 in reply to: DelftSHIP 8.08 #38241
    Martin
    Participant

    But I have done this. 😉

    April 6, 2016 at 01:03 in reply to: DelftSHIP 8.08 #38239
    Martin
    Participant

    No, this isn’t newest and why? I don’t know. 😉

    April 6, 2016 at 00:37 in reply to: DelftSHIP 8.08 #38237
    Martin
    Participant

    I don’t use czech translation from download page but new version. As U can see above. 😉
    Nobody can use the Czech what is “native” in Delftship. It is for old version of Delftship.

    April 5, 2016 at 16:32 in reply to: DelftSHIP 8.08 #38235
    Martin
    Participant

    I have found a source of problem. It is a translation to Czech. When I switch to English It works well. I found that Czech for version 281 works well but Czech for version 292 makes a problems with lines plan.

    Can you repair Czech translation version 292?

    They are here:
    Version 281
    Version 292

    April 5, 2016 at 15:44 in reply to: DelftSHIP 8.08 #38233
    Martin
    Participant

    It was a new model from template.

    March 26, 2016 at 08:21 in reply to: Wireframe #38215
    Martin
    Participant

    And where? I don’t see toggle for inner wires. B)

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 37 total)
1 2 3