Sören

Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • October 22, 2013 at 14:42 in reply to: Help, stuck on new software… #36979
    Sören
    Participant

    I think you just need DS pro !?

    May 8, 2013 at 17:27 in reply to: Approach to modelling ocean liner hull #36683
    Sören
    Participant

    Hello Trent,

    I had reproduced a 10.000TEU Container Vessel Hull.
    I bought DelftShip Pro for that task, because the auto fairing tool is sometimes very helpful.

    At First i loaded a digital lines plan with the “Import Markers” tool.
    Than moved all markes to their corresponding position.

    It was helpful for me to use an nearly similar hull from the delftship download section.
    Scale it to your values and then begin moving points.

    Use the same count of control points for each control line of your surface!

    I tried many different CAD programms for reproducing hulls. I think delftship is the best one and the professional version has got a very fair price

    April 23, 2013 at 10:23 in reply to: The stern of the processing #36662
    Sören
    Participant

    very amazing work!

    which software did you used for 3D modeling and rendering ?

    edit:
    I tried your file, but it is invalid

    January 7, 2013 at 18:55 in reply to: Fruits of my labor. #36475
    Sören
    Participant

    thanks for that information!
    I would like to see more of further projects

    best regards,

    Soeren

    January 7, 2013 at 11:25 in reply to: Frame Development #36473
    Sören
    Participant

    I am also very interested in simple frame editing.
    Just creating sections is not enough for this aim, but i think it is a simple development to provide an offset length to each section and to generate a frame surface through the offset line.

    How about that? Perhaps just for pro-version ?

    And is there a developing plan for a next release ? New features and so on ?

    Best regards,

    Soeren

    January 7, 2013 at 11:12 in reply to: Fruits of my labor. #36472
    Sören
    Participant

    very good job!
    do you know the lightweight of your boat ?
    have you measure the max speed ?

    And i would also be interested in your building technique.
    It looks like GFK? But i think not suitable for negative forming .. do you build a positive form before ? And of which material ?

    Thanks for sharing !

    Best regards,
    Soeren

    August 8, 2012 at 17:05 in reply to: Prismatic coefficient greater than 1.o #36148
    Sören
    Participant

    Your midship location is placed at 8,544 ft.
    the biggest section area seems to be at 3-4 ft (section area curve)
    thats why it is bigger.

    I guess your midship location has to be set up to the highest point of the area curve (3-4ft). Than the CP should be correct.

    July 17, 2012 at 16:43 in reply to: LNG tanker #36108
    Sören
    Participant

    I got several problems with arcs and radiuses, too.

    For example: How to create a round propeller shaft (the half shaft)

    and how to create an exact bilge radius ?

    For now i guess that delftship is not able to handle them. But i would like to get corrected …

    (perhaps a future development ?? )

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)

Recent Topics