Haugen Marc

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: Show me your ships! #35613
    Haugen Marc
    Participant

    I have been following that thread. The problem does not seem to be how to model the vessel rather then where to obtain reliable information. You will need a very accurate hull shape, compartment layout and last but not least a list with all protected/unprotected openings in order to produce reliable results for the damage stability calculation.

    Thanks for your reply. As you suggested on your post in the other forum, we are first going to work on a lines plan and use it as ‘background image’. This should make the modelling much easier and give us a better model. When our hull get ‘close’ enough, we will submit it for your review.

    in reply to: Show me your ships! #35611
    Haugen Marc
    Participant

    …And don’t forget, The uploaded files must be quite light because the DeftShip server has NOT an infinity of storing space (check for the very first post on this thread). Personnally, I upload only JPeG files, 800×600 pixels and with a size of 100 Kb maximum.
    The DelftShip team is kind enough to allow us to upload pictures just for fun, so don’t abuse!.

    DasBoot: I assume an impportant piont is what’s the vertical position of the Center of Gravity, and this point is known by the shipyard only… if someone does… Anyway, it must be on a quite high position, as it is on any modern liner. Nothing to see with the World War II battleships.

    We have data on loads and KG. Beside there is a retired NA professor on the Forum who review & comment our work. We just need a FS/DS artist who can ‘hammer’ the plating better and faster that we can (at our speed the salvage will be completed before the model is). completed)

    in reply to: Show me your ships! #35610
    Haugen Marc
    Participant

    Thanks for your reply. We are slowly gathering info. The inboard profile our drafter is working on is starting to make sens. We just need to refine the model.

    in reply to: Show me your ships! #35602
    Haugen Marc
    Participant

    I noticed you have modeled a very nice battleship. They are looking for a volunteer artist to model the Costa Concordia’s hull. A challenge !
    info posted at:
    http://www.boatdesign.net/forums/boat-design/simulating-costa-concordia-41365-5.html

    Posts 46, 54, 60, 63

Viewing 4 posts - 1 through 4 (of 4 total)