Jesus Cruz

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 123 total)
  • Author
    Posts
  • in reply to: Resistance Calculation #36671
    AvatarJesus Cruz
    Participant

    What I´m currently doing is save the file as 2.6 version and use freeship for resistance calculations, freeship has several methods for calculating the resistance (Holtrop, Wolfson, hollenbahc among others), and I have found the results very acceptable.

    so bottom line I combine Delfship and Freeship, with good results

    Regards

    in reply to: Adding a deck to model #36640
    AvatarJesus Cruz
    Participant

    There is an Icon in the “EDGE” menu, that looks like a face sligthly folded, that icon creates a deck with a small angle (deadrise)…

    AvatarJesus Cruz
    Participant

    I would love to have the MODU´s stability criteria for that new release, hehehehehehehe

    in reply to: Create a listing hullform #36493
    AvatarJesus Cruz
    Participant

    Where can i get polycad??

    AvatarJesus Cruz
    Participant

    I had contact with him early December, without any problem, he assisted me with a project, so he probably is out of the office at the moment.

    I strongly suggest you to download your software and keep a copy of the installation file in a safe place in case you need to re-installed.

    Best Regards

    AvatarJesus Cruz
    Participant

    One option could be import the stations as markers instead of points, and from that you can insert points the the markers, les number of points, a number that allow you to keep it managable.

    Hope it helps

    in reply to: Single chine XYZ import giving not strait lines. #36377
    AvatarJesus Cruz
    Participant

    Is probably because you only have points in the chine and in the deck line, try inserting points between the the chines and the deck lines and align them

    in reply to: Boat Structure Design #36362
    AvatarJesus Cruz
    Participant

    the short answer should be NO, there is not,you have a module that gives you the bending moments and shear force for a given load case, or many load cases if is the case, the ship weigth and C.G. location has to be given to the software, usually calculated with other means.

    AvatarJesus Cruz
    Participant

    the normals of the face are pointing inwards, thats what is causing the weird data

    in reply to: Delftship and Godzilla/Michlet #36334
    AvatarJesus Cruz
    Participant

    Any place I can get a manual??, ususally i learn to use a software by just click on the icons and see what happenes, but here no icon at all, so I´m asuming that works by writen commands, so I´m kind of lost

    in reply to: Delftship and Godzilla/Michlet #36331
    AvatarJesus Cruz
    Participant

    Where can i get a demo of godzilla?, sounds interesting…

    AvatarJesus Cruz
    Participant

    I ahve purchase several extensions so far, and what i have get is a digital download, is very strange that you haven´t had feed back from Martijn, he allwasy reply me back, I will try to contact him and give him your message

    in reply to: Design Hydrostatic Report #36288
    AvatarJesus Cruz
    Participant

    The design Hydrostatics report has a legend that clearly says “The following layer properties are calculated for both sides of the ship” is rigth above the table with the layer´s data.

    So bottom line the data is for both sides of the ship. I supose you are using the free version because the loadcases extension allows you to include any weigth and the modelling tanks extension allows you to model any tank and use any percentage of fill for a loadcase.

    Best regrads

    in reply to: AutoCAD & FreeShip #36282
    AvatarJesus Cruz
    Participant

    I use the import chines and curves feature very often, and I allways have to do “minor” adjustments once i get tha model, in my opinion is very fats and gives a good accurancy, so as I said, I used very often with very good results.

    AvatarJesus Cruz
    Participant

    section 6 of the manual, page 17 explain how to import the lines from a text file, I have use this feature to create dlftship files with very good results althougth still some minor adjustment will have to be done.

Viewing 15 posts - 31 through 45 (of 123 total)