Jesus Cruz

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 123 total)
  • Author
    Posts
  • in reply to: How to Fill a tank/space #38159
    AvatarJesus Cruz
    Participant

    In the load cases module you can indicate the % of fill for each tank, is that what you mean?

    Regards

    in reply to: Stability Problems #38158
    AvatarJesus Cruz
    Participant

    It doesn´t make much sense what you are saying?, can you share an image showing the coordinates system?

    If you share the file I will run some calculations, and give you my thougths about it

    Regards

    in reply to: Problem with Linesplan #38075
    AvatarJesus Cruz
    Participant

    It doesn´t help much but thanks anyway

    in reply to: DelftShip update #37843
    AvatarJesus Cruz
    Participant

    I bougth my Vaio in 2009, I guess is time to change my laptop……

    in reply to: DelftShip update #37840
    AvatarJesus Cruz
    Participant

    Not all the computers has the OpenGL Ada, I have two laptops one is Toshiba the other is Sony Vaio, I updated the software to 7.1 versión in the Toshiba and everhting went well, but I did it in the Vaio to discover that Vaio does not use Open GL, therefore I had to went back to versio 6.35 in the Vaio…

    So is better if you check with the computer manufaturer……

    Regards

    in reply to: Michlet, Flotilla and FIRM #37797
    AvatarJesus Cruz
    Participant

    I still can make the files from Delftship work in michlet, and there is a problema with creating the files of multihulls for michlet in delftship

    in reply to: DelftShip update #37796
    AvatarJesus Cruz
    Participant

    I have the same problema with my lap top……

    in reply to: Best Resistance series for larger RORO vessels #37693
    AvatarJesus Cruz
    Participant

    Look for the software Freeship in the web, downloaded and isntalled, then sabe the file that you have in delftship as versión 2.6, that file can be opened with Freeship, and Freeship has the option to calculate the resistance with several methods, including Holtrop-Mennem, and Hollenbach….

    Hope this helps

    in reply to: Help, stuck on new software… #37124
    AvatarJesus Cruz
    Participant

    DS Pro can export to IGES…..

    in reply to: import from Rhino #37123
    AvatarJesus Cruz
    Participant

    Export as Iges from rhino, and import as IGES to delftship. that should do it

    in reply to: Imported markers from DXF successfully….What now? #36732
    AvatarJesus Cruz
    Participant

    There is an icon that says “extract points from markers” if you click it, the curves imported from the dxf as markers will have ponits all over the geometry, all you have to do is create the faces from those points, use 4 points for face whenever is posible…

    Regards

    AvatarJesus Cruz
    Participant

    Same result here however, when I do it backwards going from the Delftship file to a DXF and then from DXF to Delftship file, works fine, so I supose that your file is not rigth for some reason.

    AvatarJesus Cruz
    Participant

    To be honest i don´t know which could be the problem, can you share the dxf file with me so I can run some test and see what could be the problem??, maybe your dxf file is corrupted, in any case have to be 3d polyline DXF file……

    AvatarJesus Cruz
    Participant

    First open a new file, set the longitudinal number of points to zero, also the vertical number of points to zero

    a totally blank screen will appear, from that go to the tools menu, click in the import markers and click it, it will open a screen where you can choose the file where to import the markers from, selected the desired DXF file and acepted, the DXF file will be transfer to Delftship as markers where you can use it to generate the model.

    Hope this helps regards

    AvatarJesus Cruz
    Participant

    The data that you must enter in the dialog box is the weigth of the layer per cubic feet and the thikness of the layer in feet, that way the system will calculate the weigth and center of gravity of the layer…

Viewing 15 posts - 16 through 30 (of 123 total)