Wireframe
› DELFTship forum › General Questions › Wireframe
- This topic has 8 replies, 4 voices, and was last updated 6 years, 4 months ago by
giorgio zuppin.
-
AuthorPosts
-
-
March 23, 2016 at 12:03 #38203
Martin
ParticipantI don’t know what I do wrong. 🙁
Where wireframe is?
When I toggle wireframe mode I can see only outline wires. How I can toggle inner wires too?
Is it a bug or is there any “button” for this? -
March 25, 2016 at 22:42 #38208
-
March 26, 2016 at 08:21 #38215
Martin
ParticipantAnd where? I don’t see toggle for inner wires. B)
-
March 26, 2016 at 13:16 #38216
dusty
ParticipantYou need a set of elements of the ship? Such as frames, stem, stern-post, ribs and others?
-
March 27, 2016 at 01:31 #38217
Robert Holme
ParticipantI think there is confusion here.
This is a surface modelling program so as drawn, the basic hull has no thickness, (even though thickness and material may be added in layer properties), which means there are no inner wires.
Hope this helps.
Regards
Bob -
March 27, 2016 at 14:20 #38218
dusty
ParticipantI think there is…
well, then tell me how you can use the program to simulate the ship’s hull, a small yacht. It may be possible to move the simulated surface contours of DELFTship in CATIA or other program where you can make the surface layer of the metal case directly?
A practical sense of DELFTship? How to use it is possible to make drawings for a yacht?
-
March 27, 2016 at 19:48 #38221
giorgio zuppin
ParticipantAre you kidding?
Export an .stl – .obj – or IGES file to CATIA or any 3DCAD : starting data for any project.
But we are slightly out of topic, I mean Maryak has the point: Taby may have missed something about the prog. -
March 27, 2016 at 20:32 #38222
dusty
Participantok 🙂 Thank you. I just do not understand very well on English 😉
-
March 27, 2016 at 22:51 #38223
giorgio zuppin
ParticipantYou’r welcome, in need just ask, within our (poor) knowledge Forum is just for help.
Bye, Jurgen.
-
-
AuthorPosts
- You must be logged in to reply to this topic.
Your account
Recent Topics
-
Download Problems
by
William Boebert
7 hours, 58 minutes ago -
Developable surface (wrong orientation)
by
Hrvoje
3 weeks, 1 day ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
3 weeks, 1 day ago -
Need OSV, AHTS,PSV Vessel hull bodylines plans
by
jacksparrow1912
1 month ago -
Can’t figure out how to model the back
by
Tidexon
1 month ago -
Critical Program Error
by
Allan Russell
1 month, 1 week ago -
Saving reports in Word or Excel format
by
Berislav Tusek
1 month, 2 weeks ago -
Attaching keel to hull
by
Matthieu
1 month, 3 weeks ago -
Modeling the 1907 U.S. Brigantine Galilee
by
Terrance Egolf
1 month, 3 weeks ago -
HOW TO USE THAT SOFTWARE
by
mirmir
3 months, 3 weeks ago