User Manual
› DELFTship forum › Feature requests › User Manual
- This topic has 2 replies, 3 voices, and was last updated 10 years ago by
iosif gross.
-
AuthorPosts
-
-
August 6, 2012 at 02:10 #36139
pieter baasje
ParticipantHi…
Trying DELFTship. So far it looks really good, but the 3.3 manual from 2008 really seems to be out of sync with the product (states that ctrl-A selects all points, for example (?))
I do not know DS well enough to really say, but it seems to me it could be missing lots of other things too.
Is a V5 version being worked on ?
Thanks !
-
February 21, 2013 at 23:12 #36537
tuka
ParticipantHi…
Trying DELFTship. So far it looks really good, but the 3.3 manual from 2008 really seems to be out of sync with the product (states that ctrl-A selects all points, for example (?))
I do not know DS well enough to really say, but it seems to me it could be missing lots of other things too.
Is a V5 version being worked on ?
Thanks !
Hello all,
I am a newbie and I also wonder if there is a newer version of User Manual. I have User Manual v.3.3. from 2008 which somehow came with DelftShip V.5.24.223.
I would like to print the user manual. So, I need the latest. Is 3.3 the latest version?
Thank you very much for your help.
-
March 3, 2013 at 04:36 #36556
iosif gross
ParticipantI think also that it will be nice to have a new manual after more than four years
Iosif
-
-
AuthorPosts
- You must be logged in to reply to this topic.
Your account
Recent Topics
-
Modeling the 1907 U.S. Brigantine Galilee
by
Terrance Egolf
1 month ago -
install problems
by
tcurdt
1 month, 1 week ago -
VCG and GM of Smit Rotterdam
by
DuncanH
1 month, 1 week ago -
Revision/save history?
by
Jamie
1 month, 1 week ago -
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
3 months, 2 weeks ago -
Cylinder through curved deck
by
RuudN
3 months, 2 weeks ago -
Exporting table of offsets
by
Peter Mitchell
4 months, 2 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
4 months, 3 weeks ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
4 months, 4 weeks ago -
Deck Camber
by
patmat41959
4 months, 4 weeks ago