unSubdivide controlnet
› DELFTship forum › Hull modeling › unSubdivide controlnet
- This topic has 5 replies, 4 voices, and was last updated 12 years, 12 months ago by
Marven.
-
AuthorPosts
-
-
December 31, 2009 at 01:19 #33857
James W Breaux
ParticipantHowdy from Texas!
I have started modeling a double ender and in the heat of my design I asked to subdivide the controlnet.
I would like to neatly “unsubdivide” the control net to get back to a more planar model.
Of course, I have a lot of work between the subdivision and the need to un-subdivide, so Undo is not an option.
Any tips on an easy way to do this?
Thanks -
January 1, 2010 at 00:04 #33858
Marven
KeymasterYou can select edges, and use the “collapse” command to remove them from your model by merging the two connected faces into one.
-
January 1, 2010 at 07:33 #33860
James W Breaux
ParticipantThe collapse command was exactly what I needed.
Thanks very much for your help and quick response.
Have a Happy and Prosperous New Year! -
January 7, 2010 at 05:34 #33864
otaku
ParticipantI have been burning to ask this: Can i use this technique to “stretch” or to “shorten” a hull? It would be neat if there were a feature to ask for one or more areas where lengthening or shortening are desired and what areas of the body are not to be touched (algorithmically modified) in either a manual or automatic re-fairing.
Stated again, but shorter: Can/does D’ship facilitate model resizing without using the automatic or other feature (if i am not currently aiming for optimizing the hull with the tool already in Free, but desperately want to modify the length?
-
December 10, 2010 at 14:46 #34471
alex
ParticipantWhat if you have 1 face where you want to unsubdivide the controlnet?
-
December 10, 2010 at 17:12 #34472
Marven
KeymasterI don’t see how you can un-subdivide a single face….
-
-
AuthorPosts
- You must be logged in to reply to this topic.
Your account
Recent Topics
-
Offset surface with errors
by
Felsentreu
4 days, 19 hours ago -
Offset Table import
by
MBerlin
5 days, 20 hours ago -
what is that, can i prevent it ?
by
flo
1 week, 6 days ago -
howto make “squared curved” surface to a “round curved” surface
by
flo
1 week, 6 days ago -
Saving on exit
by
iggi
3 weeks, 6 days ago -
Orbit Feature Origin
by
Terrance Egolf
3 weeks, 6 days ago -
Printing stations separate
by
flo
4 weeks ago -
Adding new point
by
flo
1 month ago -
Adjust Font or Number size in linesplan
by
flo
1 month, 1 week ago -
Maximum VCG’ Envelope not displaying values
by
J_Lundstrom
1 month, 3 weeks ago