Taffy by Charles M. Ungerbuehler
› DELFTship forum › Hull modeling › Taffy by Charles M. Ungerbuehler
- This topic has 2 replies, 1 voice, and was last updated 12 years ago by
John Jones.
-
AuthorPosts
-
-
November 8, 2011 at 18:11 #35325
John Jones
ParticipantHi,
I am new bee in boat building and DelftShip as well and last few months I have spent reading about the topic.. finally I decided to build small boat Taffy designed back in the 50’s..
I never used delftShip before but with the help of some tutorials I found here I managed to come this far (with the table of offsets and some diagram of the boat which I have).Being inexperienced in this field I am not sure did I do everything right size-wize and regarding transferring all the info from table of offsets right.
Would this boat float and should I do anything to make it better/safer on the water? I plan to use it on a sea with 40-60 hp outboard motor (is that enough power for boat like this?)
I would appreciate some advice and help from those of you who know the software better so I could finish hull design print out drawings and start chopping the wood :).
Thanks in advance to all.
Attachments: -
November 8, 2011 at 18:20 #35327
John Jones
ParticipantHere it is… delftship file and drawings I’ve worked off.
https://rapidshare.com/files/75577433/Taffy.fbm
https://rapidshare.com/files/3589543446/Taffy_drawing.pdf
https://rapidshare.com/files/3334848496/Taffy_table_of_offsets_in_inch_and_cm.xls
-
November 14, 2011 at 02:48 #35337
John Jones
Participant🙁 anyone, any thoughts?
-
-
AuthorPosts
- You must be logged in to reply to this topic.
Your account
Recent Topics
-
Offset Table import
by
MBerlin
58 minutes ago -
Offset surface with errors
by
Felsentreu
4 days, 21 hours ago -
what is that, can i prevent it ?
by
flo
1 week, 6 days ago -
howto make “squared curved” surface to a “round curved” surface
by
flo
1 week, 6 days ago -
Saving on exit
by
iggi
3 weeks, 6 days ago -
Orbit Feature Origin
by
Terrance Egolf
3 weeks, 6 days ago -
Printing stations separate
by
flo
4 weeks ago -
Adding new point
by
flo
1 month ago -
Adjust Font or Number size in linesplan
by
flo
1 month, 1 week ago -
Maximum VCG’ Envelope not displaying values
by
J_Lundstrom
1 month, 3 weeks ago