No linesplan – Win7 problem?
› DELFTship forum › Hull modeling › No linesplan – Win7 problem?
- This topic has 5 replies, 2 voices, and was last updated 11 years, 7 months ago by
Marven.
-
AuthorPosts
-
-
August 24, 2011 at 12:20 #35037
Tiago
ParticipantHi all.
I recently upgraded to a new laptop with Windows 7 (instead of the XP on the old one).
Now I’m unable to see the linesplan. I get a funny picture…
Anyone else out there with similar problems?
Anyone else running Delftship on Windows 7? (I find it weird that I’m the only one).Cheers,
Tiago
-
August 24, 2011 at 12:28 #35039
Marven
KeymasterI’ve been running on Windows 7 64 bit for a long time, so that’s not the problem.
Can you send your delftship model to:
-
August 24, 2011 at 12:36 #35040
Tiago
ParticipantThanks for the quick reply Marven.
I just tested an older version of my model and indeed it works.
I’ll send both (older and newer) to the address you gave me to see if you can tell me what’s wrong (I’m almost sure I got a linesplan from this before but maybe I didn’t).
Thanks a lot,
Tiago
-
August 24, 2011 at 12:41 #35041
Marven
KeymasterYou have added the water surface to your model.
This surface is also drawn in the linesplan, and it’s so big that it obscures your ship model.
To solve this, go to the layer settings window and exclude the water surface from the linesplan drawing. -
August 24, 2011 at 12:45 #35042
Tiago
Participant:blush: :blush:
Now I feel really dumb. Of course. Lots of blue. Water. Makes sense. Dummy me.
Thanks a lot Marven and sorry for taking your time on such a stupid issue :blush:
-
August 24, 2011 at 12:56 #35043
Marven
KeymasterNo problem! 😛
-
-
AuthorPosts
- You must be logged in to reply to this topic.
Your account
Recent Topics
-
Modeling the 1907 U.S. Brigantine Galilee
by
Terrance Egolf
1 month ago -
install problems
by
tcurdt
1 month, 1 week ago -
VCG and GM of Smit Rotterdam
by
DuncanH
1 month, 1 week ago -
Revision/save history?
by
Jamie
1 month, 1 week ago -
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
3 months, 2 weeks ago -
Cylinder through curved deck
by
RuudN
3 months, 2 weeks ago -
Exporting table of offsets
by
Peter Mitchell
4 months, 2 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
4 months, 3 weeks ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
4 months, 4 weeks ago -
Deck Camber
by
patmat41959
4 months, 4 weeks ago