mouse problem
› DELFTship forum › Feature requests › mouse problem
- This topic has 4 replies, 2 voices, and was last updated 10 years, 4 months ago by
Pentti Hakala.
-
AuthorPosts
-
-
November 18, 2012 at 20:41 #36407
Pentti Hakala
ParticipantHi everybody,
I have an awkward problem. After I have moved a point with mouse, it ( the point) will slowly return to the original point. This may not have anything to do with the program, but anyway somebody probably have advice to this.
I thank you.
Pena
-
November 19, 2012 at 20:06 #36408
Marven
KeymasterThat’s strange!
Does it return to it’s original position even if you keep your mouse still? -
November 20, 2012 at 23:44 #36413
Pentti Hakala
ParticipantHi,
Yes, it returns to the original position when I leave the mouse still.
This is something new to me, because it use to work properly earlier.
I been wondering also that the cause could be somekind of a mouse based
problem, but there has not appeared any problems in other tasks with mouse.Pena
-
November 21, 2012 at 20:03 #36416
Marven
KeymasterThis actually sounds like a hardware problem.
You could try a different (usb) mouse to be certain -
November 25, 2012 at 19:16 #36434
Pentti Hakala
ParticipantHi,
my problem concerning the mouse was defeated by reloading the total program again.
So, it is probable that in my computer certain file of the program was corrupted.thank you,
Pena
-
-
AuthorPosts
- You must be logged in to reply to this topic.
Your account
Recent Topics
-
Modeling the 1907 U.S. Brigantine Galilee
by
Terrance Egolf
1 month, 1 week ago -
install problems
by
tcurdt
1 month, 1 week ago -
VCG and GM of Smit Rotterdam
by
DuncanH
1 month, 1 week ago -
Revision/save history?
by
Jamie
1 month, 1 week ago -
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
3 months, 2 weeks ago -
Cylinder through curved deck
by
RuudN
3 months, 3 weeks ago -
Exporting table of offsets
by
Peter Mitchell
4 months, 2 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
4 months, 3 weeks ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
4 months, 4 weeks ago -
Deck Camber
by
patmat41959
4 months, 4 weeks ago