Jetboat Construction few photos
› DELFTship forum › Hull modeling › Jetboat Construction few photos
- This topic has 3 replies, 2 voices, and was last updated 10 years, 2 months ago by
Icare.
-
AuthorPosts
-
-
January 13, 2013 at 07:55 #36484
Jamie
ParticipantI have been using freeship 2.6 and drew a hull. I will also attach a few pics of my finished boat.
Now i have bought the pro version and am just starting to learn some of the new features. Then i will construct a second jetboat.
here is a youtube video of it running the river.
-
January 24, 2013 at 20:50 #36500
Icare
ParticipantSeems cool! B)
How much water depth do you need? It seems you sometimes run on the river’s bottom rocks, don’t you?
What’s you’re boat’s top speed? What are your engine’s stats?
-
January 25, 2013 at 06:56 #36507
Jamie
Participant100mm (4 inches) once your moving. it can actually slide acros a short section of dry ground if need be. its built strong enough.
top speed is around 70 km/h but im hoping my next one will be close to 100kmh. the new supercharged jetskis are 110 km/h so if i use that engine i dont see why not. the current engine is a 3 cylinder two stroke. 780 cc better on gas than the sc ones though.
heres a link to the build forum… -
January 25, 2013 at 21:16 #36510
Icare
ParticipantThanks! 😉
-
-
AuthorPosts
- You must be logged in to reply to this topic.
Your account
Recent Topics
-
Modeling the 1907 U.S. Brigantine Galilee
by
Terrance Egolf
1 month, 1 week ago -
install problems
by
tcurdt
1 month, 1 week ago -
VCG and GM of Smit Rotterdam
by
DuncanH
1 month, 1 week ago -
Revision/save history?
by
Jamie
1 month, 1 week ago -
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
3 months, 2 weeks ago -
Cylinder through curved deck
by
RuudN
3 months, 3 weeks ago -
Exporting table of offsets
by
Peter Mitchell
4 months, 2 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
4 months, 3 weeks ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
4 months, 4 weeks ago -
Deck Camber
by
patmat41959
4 months, 4 weeks ago