How to DXF file is imported into the DELFTship software

[f2831890]

🙁 Who can tell me what to do, is there any good method to be able to file imported into the software. 🙁

[Jesus Cruz]

First open a new file, set the longitudinal number of points to zero, also the vertical number of points to zero

a totally blank screen will appear, from that go to the tools menu, click in the import markers and click it, it will open a screen where you can choose the file where to import the markers from, selected the desired DXF file and acepted, the DXF file will be transfer to Delftship as markers where you can use it to generate the model.

Hope this helps regards

[Ole Jacob Hagen]

Hi,

When I load DXF files I get the “Error reading entity”-message from Delftship.
So I click OK 100 times, and a confirmation dialog box appear saying:
“Do you wnt to merge smaller line segments”. Answer Yes or No.
Regardless of my response, Yes or No, Delftship will show an Information box saying: “No markers could be imported”.

What version of DXF are supported by Delftship?
What information should the DXF file include?

Should it include polylines, mesh?

A file example would be great.

Best regards,

Ole

[Ole Jacob Hagen]

Haha,

Using new software is the same as assemble a new Ikea furniture.
If nothing else helps, read the assembly manual.

In the user manual it states that :

* Autocad DXF files (*.dxf). The files need to be in Autocad R12 format. Only lines, polylines arcs and circles are imported as markers.

Ole

[Ole Jacob Hagen]

Hi,

I still get the same error messages mentioned above:
When I load DXF files I get the “Error reading entity”-message from Delftship.
So I click OK 100 times, and a confirmation dialog box appear saying:
“Do you wnt to merge smaller line segments”. Answer Yes or No.
Regardless of my response, Yes or No, Delftship will show an Information box saying: “No markers could be imported”.

How should the R12 file look like to be accepted?

Ole

[f2831890]

My software is free, no DXF 🙁 🙁 🙁 🙁 🙁 🙁 🙁 🙁 🙁 🙁 🙁 🙁

[Marven]

Can you send me your DXF file so I can have a look?
Just send it to:

[Marven]

Check the “Import markers” menu button on the Tools tab. It should be there….

[f2831890]

THE ERO

and the file DXF

seaA.zip

thank you！

[f2831890]

[f2831890]

[Jesus Cruz]

To be honest i don´t know which could be the problem, can you share the dxf file with me so I can run some test and see what could be the problem??, maybe your dxf file is corrupted, in any case have to be 3d polyline DXF file……

[Ole Jacob Hagen]

Hi,

I tested the example given by f2831890, with the same result.

Best regards,

Ole

[f2831890]

File stored in the #3319

[Jesus Cruz]

Same result here however, when I do it backwards going from the Delftship file to a DXF and then from DXF to Delftship file, works fine, so I supose that your file is not rigth for some reason.

[f2831890]

Where is the reason？

[Author]

Posts