August 11, 2012 at 02:12 #36161pmapaParticipant
Hy. I,m a new user of Delftship, It’s possible that the command
doesn’t work in a free version, or I’m just a useless guy?
August 17, 2012 at 18:15 #36175IcareParticipant
Bienvenido en la comunidad de los utilizadores de FreeShip/DelftShip!
The EDIT commands are enabled only after you changed something (UNDO), after you canceled an action (REDO) or after you selected a point or a polygon’s edge (DELETE). Until this, the buttons are greyed because thet’re just useless.
Los botones de la seccin EDIT son utilizables unicamente después que hayas cambiado algo en tu dibujo (UNDO), después que hayas cancelado una accion (REDO) o después que hayas seleccionado un punto o una arista (DELETE). Antes de hayas echo una de estas acciones, los botones son grisaceos porque no son utiles.
Perdoname mi español, me faltan muchas palabras, jé, jé, como a mi inglés 😛
August 17, 2012 at 19:39 #36177pmapaParticipant
Your spanish it’s better than mine. I find your program very usefull, specially for people with no experience (like me). If you don’t mine, it’s possible I would bother you again.
August 22, 2012 at 18:56 #36186IcareParticipant
No problema, Carlos!
But I’ve to mention that I am NOT member of the Deft developpement team, but just an user like you. I’ve been using DS for a longer time than you, that’s all. 😉
I remember I was quite puzzled on the begining: my computer was too old to use the DS version on the time I discovered it, and Marven offered me the link to an older version.
Now, I thinks I’ve to help the newbies (and the others, too :whistle: ). That this forum’s spirit, I feel.
So, if you need more help, just create a new topic, put your question, and if someone (me or anybody else) feels helpful you’ll get an answer… or many answers 😉
My weak point is I know absolutely nothing in ship design theorics (I prefer airplanes).
My strong point is the 3D modelling.
So I can help you using DS, but not designing a *good* ship.
Here on this forum, there’s an other member who can be very helpful to you: Cruzmayora (He made real ships and he speaks spanish, too!).
Hasta la vista!
August 30, 2012 at 01:47 #36197
Hi pampas, welcome to the forum and to Delftship, I´m a Mexican naval Architect and I have been using delftship for quite some time now, I´ll be happy to help you.
Bienvenido al foro y a Delftship, pampas en lo que pueda yo ayudarte con mucho gusto lo haré.
September 11, 2012 at 00:14 #36239CristianoParticipant
I’m also new here and I’m having almost the same problem as Carlos does.
According to the tutorial to add a surface you need to Select Edit => Face => New from the mainmenu to add the new face.
Although I see the menue “EDIT” I can only “undo” and “bin” the action. no “Face” 🙁
Many thanks in advance for your help/suggestions
September 11, 2012 at 02:53 #36240
To add a new face you have to select at leats 3 control points, when at least 3 control points are selected the icon “Face” will be available.
Hope this helps
September 11, 2012 at 11:14 #36244BaliunasParticipant
I am beginner in DF and I not understand what have in mind “The last column represents the height of the on each station” in manual on page 22. It is the sheerline or other line? My table of offset DF determined as “Invalid numeric input”. Where is my mistake? I worked with AutoCAD before. Thanks for any information.
September 12, 2012 at 08:24 #36250
It is not the sheer line, it is the keel line contour
September 12, 2012 at 09:36 #36251CristianoParticipant
thanks for the tip.
in fact in the version 5 of DELFTship the surface menu is not under “Edit”… there is a dedicated menu that appears (you are right and thanks for your suggestion) when you select the 3 control points 🙂
Maybe the tutorial will be updated 😉
All the best
September 13, 2012 at 04:43 #36252
You are going to get better results if you use 4 points to define a “face”, the most you use 4 points for each face the better, althoutgh is not allways posible.
Best Regards and good luck
- You must be logged in to reply to this topic.
by William Boebert
1 week ago
Developable surface (wrong orientation)
1 month ago
Modelling a flat bottom chine tug hull (WWII TID)
1 month ago
Need OSV, AHTS,PSV Vessel hull bodylines plans
1 month, 1 week ago
Can’t figure out how to model the back
1 month, 2 weeks ago
Critical Program Error
by Allan Russell
1 month, 2 weeks ago
Saving reports in Word or Excel format
by Berislav Tusek
1 month, 4 weeks ago
Attaching keel to hull
2 months ago
Modeling the 1907 U.S. Brigantine Galilee
by Terrance Egolf
2 months ago
HOW TO USE THAT SOFTWARE
3 months, 4 weeks ago