From Drawings to Real
› DELFTship forum › Hull modeling › From Drawings to Real
- This topic has 6 replies, 4 voices, and was last updated 10 years ago by
iosif gross.
-
AuthorPosts
-
-
March 3, 2013 at 11:31 #36561
Usman Falah
ParticipantI want to know how people could use technical drawing from DELFTship to build a real boat..?
Attachments: -
March 3, 2013 at 17:58 #36566
f2831890
ParticipantI want to know how people could use technical drawing from DELFTship to build a real boat..?
I drawing from DELFTship to build a boat model
-
March 5, 2013 at 00:13 #36573
Hrvoje
ParticipantHi, Usman!
You can use DelftShip to define the ship’s form. To build the real boat you must have a set of drawings (workshop drawings) where are defined constructional details of this boat. Then using these workshop drawings you can start to build the boat.
I hope this can help you. 🙂Kind regards, Hrvoje
-
March 6, 2013 at 03:48 #36582
iosif gross
ParticipantHi Usman
I am importing the .DXF files generated by Delfship (Lines plan) to AutoCad and going forward with the building plans.
Any other CAD program will be OK if can open DXF.
By the way, you can get also the unfolded panels with the analyses if you have DelftshipIosif
-
March 7, 2013 at 21:36 #36586
Usman Falah
ParticipantThanks for the comment and the Idea. The Idea you gave is so valuable.
So, for me, the next step is to understand the “WORKSHOP DRAWINGS”
Can anyone share me few workshop drawing…? -
March 9, 2013 at 12:14 #36593
iosif gross
ParticipantHi Usman
I can’t send you the .dwg and the .dxf file as can’t be attached. Maybe can, let’s see
I am attaching you the .fbm, and xyz files, you can make a linsplan output (.dxf) and make it .dwg if you are using AutoCad.Iosif
Attachments: -
March 9, 2013 at 12:21 #36594
iosif gross
ParticipantSending again the .fbm
Attachments:
-
-
AuthorPosts
- You must be logged in to reply to this topic.
Your account
Recent Topics
-
Modeling the 1907 U.S. Brigantine Galilee
by
Terrance Egolf
1 month ago -
install problems
by
tcurdt
1 month ago -
VCG and GM of Smit Rotterdam
by
DuncanH
1 month ago -
Revision/save history?
by
Jamie
1 month, 1 week ago -
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
3 months, 2 weeks ago -
Cylinder through curved deck
by
RuudN
3 months, 2 weeks ago -
Exporting table of offsets
by
Peter Mitchell
4 months, 2 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
4 months, 2 weeks ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
4 months, 3 weeks ago -
Deck Camber
by
patmat41959
4 months, 3 weeks ago