Dynamic wind heeling criteria
› DELFTship forum › Hydrostatics and stability › Dynamic wind heeling criteria
 This topic has 2 replies, 2 voices, and was last updated 10 years, 8 months ago by jenske.

AuthorPosts


May 19, 2010 at 11:50 #34103jenskeParticipant
Hoi Martijn,
How can I implement the Dynamic wind heeling criteria?
The angle Phi c due to the windmoment has to be maximum 40 degrees or the angle of flooding when this is less than 40 degrees.
Whit a fixed roll back angle to minus 10 degrees.Groetjes Jenske

May 20, 2010 at 11:11 #34108MarvenKeymaster
Which wind criterion do you need?
There are several wind criteria available in Delftship. The screenshow below shows how to limit the upper angle to the lesser of 40 degrees or the downflooding angle (red circle).The blue ellipse shows the settings for the rollback angle. There are several options:
 Use the rollback angle as defined by the IMO
 Use a fixed rollback angle. Starting from the intersection of the wind heeling lever with the stability curve the ship rollsback a specified amount of degrees.
 Specify a “Roll back to” angle. The ship rolls back to the specified angle. I assume you need this last option.
Attachments: 
May 20, 2010 at 11:59 #34111jenskeParticipant
Yes I already sorted it out I needed a fixed roll back angle to 10 degrees, whit the criteria that the reaction angle should be less than 40 degrees what I couldn’t find.
But I can work with the A/B ratio that gives the same result.Gr Jenske


AuthorPosts
 You must be logged in to reply to this topic.
Your account
Recent Topics

Weight and displacement seem odd
by Diver
52 minutes ago

Background Images in v.310 (324)
by Terrance Egolf
2 days, 15 hours ago

Jan 14th 2021 update.
by Frank Russell
4 days, 21 hours ago

Cross Curves of Stability (KNValues)
by martin_
4 days, 21 hours ago

New wersion Intersections problem
by Mbober1
5 days, 3 hours ago

Version 13.10.324
by Terrance Egolf
5 days, 17 hours ago

Trimaran design
by rafou6033
2 weeks, 5 days ago

RC speedboat catamaran Delftship blueprint
by aleks
1 month, 3 weeks ago

Hull modeling from offset table
by trangtun
2 months ago

control points
by gja.plaisier@gmail.com
2 months, 3 weeks ago