double chine
› DELFTship forum › Hull modeling › double chine
- This topic has 17 replies, 3 voices, and was last updated 11 years, 7 months ago by
Sergio Diaz-Ibieta.
-
AuthorPosts
-
-
March 18, 2012 at 04:45 #35697
atef
Participanthow can i stop the chine at a specific length,so i need to know the adjusting will be in chine import txt please replay
thanks -
March 25, 2012 at 07:10 #35742
Sergio Diaz-Ibieta
ParticipantDear Saleh,
Chines are made by applying the “Set Crease” button when one or more edges are selected. If you want to stop a chine length, just select the appropriate number of edges and turned them crease edges. -
March 25, 2012 at 16:24 #35748
atef
Participantthanks a lot
please replay me with video to show me how can i stop the chine at a specific length. -
March 25, 2012 at 18:49 #35752
Hrvoje
ParticipantJust make the edge not crease from the desired point. I attached the pictures to illustrate how to do that.
I hope it helps. 🙂Attachments:Kind regards, Hrvoje
-
March 25, 2012 at 23:50 #35762
atef
Participantthanks a lot
but i give the program the chine text from program import so i need your experience to stop the chines inside the chine txt file so i need your help.Attachments: -
March 26, 2012 at 00:15 #35765
Hrvoje
ParticipantI am very sorry to say, but I never used this way of work. Consequently I am not of any use in your case.
I imported your chines and I got a ship of very irregular bow shape. What kind of ship are you doing?
Kind regards, Hrvoje
-
March 26, 2012 at 00:43 #35769
atef
Participantthanks for replaying
i am a student in final year of naval architecture and marine engineering dept.
so that the offset i sent mega yacht offset.
so i need your help how can i adjust this offsets to make good lines plane
and re import it to delft ship. -
March 27, 2012 at 02:53 #35798
atef
Participantthanks a lot for your help
but please i need your experience to repair the irregular bow and stop the chinesAttachments: -
March 27, 2012 at 12:41 #35801
Hrvoje
ParticipantHi, Saleh!
Is the chine import in the DelftShip program the only way to obtain hull form? If not, try to create new hull using program’s NEW function. In the process of hull creation you will be asked for main dimensions of the ship. Automatically created hull will not be that what you need, but by implementing some changes you can obtain the hull you need.
Also, you can search Design database for the ship which is the closest to the form of your ship. Then you can change the hull shape to obtain needed form.In the download area of this site you have User’s Manual for DelftShip program. You will need Acrobat Reader to open it.
I wish you successful day. 🙂
Kind regards, Hrvoje
-
March 28, 2012 at 08:34 #35809
atef
Participantthanks a lot for your help
i am a student in final year of naval architecture and marine engineering dept.
my project is a mega yacht my prof. give the offsets so i imported it in delft prog.
and the bow has irregular shape so i need your help to give me mega yacht template
or direct my what i do??
thanks -
March 28, 2012 at 16:28 #35811
Hrvoje
ParticipantHi Saleh!
How familiar are you with DelftSHIP? It would be nice to me, to know how detail instructions you will need of me.
Can you successfuly import the chines from the “txt” file?Kind regards, Hrvoje
-
March 28, 2012 at 17:24 #35815
Hrvoje
ParticipantAfter you import the chines check the hull form to see if you are satisfied with it.
On the picture above you will see that the bow form is not as you could expect.
Do you need the bow as on the picture above?Kind regards, Hrvoje
-
April 8, 2012 at 02:16 #35826
atef
ParticipantHello,
Mr Dida
i make reform of the bow of mega yacht so, i need your experience to check this file from lines plane,design hydrostatic report and tell me if the design of this model is accepted or not.
i need your replay please
thanks a lotAttachments: -
April 8, 2012 at 17:35 #35827
Sergio Diaz-Ibieta
ParticipantHi Saleh,
It seems to me that you didn’t use the CREASE edges for defining your chines. The result is that you have to create the hull with too many edges and points (crazy…). Find attached a refined model (without smoothing) where I just took some excess points and edges away.
Althought I don’t think this is a goog -
April 10, 2012 at 05:49 #35830
Sergio Diaz-Ibieta
ParticipantHi Saleh,
Try this one to check your hull. See how points and edges are arranged to build a hull similar to yours. Hope you find it usefull.
Regards,
Sergio. -
April 12, 2012 at 17:04 #35850
Hrvoje
ParticipantHi, Saleh!
sd_naval gave you very good advice and it is good idea to follow it. Take as limited number of control points as possible to define the hull. I don’t know what exactly is your task and consequently it is very difficult to say if your hull is good. I had a look at sd_naval’s last version of the hull and I like it. Do you have a mentor at the university? Maybe he can help you better than people on the forum. Here, we mainly discuss how to use DelfSHIP software.
Have a nice day!
Kind regards, Hrvoje
-
April 21, 2012 at 23:20 #35922
atef
Participantthanks alot
but i need to save the file as a delft file version 4
please replay to meAttachments: -
April 22, 2012 at 20:23 #35926
Sergio Diaz-Ibieta
ParticipantHi Saleh,
Please find attached the previous file I sent to you, but now in DS version 4.1
Hope you enjoy it.
PS: this is fairly good to start working in arrangement, stability, etc., but not faired for production purposesRegards,
Sergio.
-
-
AuthorPosts
- You must be logged in to reply to this topic.
Your account
Recent Topics
-
howto make “squared curved” surface to a “round curved” surface
by
flo
15 hours, 1 minute ago -
Offset Table import
by
MBerlin
1 day, 1 hour ago -
Offset surface with errors
by
Felsentreu
1 week ago -
what is that, can i prevent it ?
by
flo
2 weeks, 1 day ago -
Saving on exit
by
iggi
4 weeks, 1 day ago -
Orbit Feature Origin
by
Terrance Egolf
4 weeks, 1 day ago -
Printing stations separate
by
flo
1 month ago -
Adding new point
by
flo
1 month, 1 week ago -
Adjust Font or Number size in linesplan
by
flo
1 month, 1 week ago -
Maximum VCG’ Envelope not displaying values
by
J_Lundstrom
1 month, 3 weeks ago