chined construction
› DELFTship forum › Hull modeling › chined construction
- This topic has 5 replies, 4 voices, and was last updated 10 years, 1 month ago by
Hrvoje.
-
AuthorPosts
-
-
June 20, 2012 at 14:31 #36064
adriano natalini
ParticipantHi there,
can anyone give the tip how to get hull planks longitudinally straight?
I cannot give the proper plank curvature at the frame joint. 🙁
Many thanks for any suggestion
Adriano 🙂Attachments: -
June 21, 2012 at 15:37 #36065
Eric Bailey
ParticipantHello,
I am not sure what you mean – however letting ease of construction or some other arbitrary factor dictate hull shape is not the way to go…
In other words if the planks are straight you have a Kleenex box shaped boat!
-
June 21, 2012 at 18:37 #36066
adriano natalini
ParticipantThanks eb,
Yes, most probabily the way I set the question it could be somehow missunderstood.
Anyhow I got it allmost right now.
AdrianoAttachments: -
June 22, 2012 at 21:39 #36072
Hrvoje
ParticipantHi! I believe that you should have crease edge on the connection of the deck and the stem. (Selected edges on the picture.)
Kind regards, Hrvoje
-
December 20, 2012 at 11:48 #36456
miro
ParticipantPoštoni g.Dida,
evo ,novi sam na ovom forumu,instalirao sam delftship na svoje računalo i pokušavam započeti prvi projekt.
Pokušavam prebaciti linije iz AUTOCADA 2010 u delftship,no ne uspijevam.
Nadalje,da li ima neka instrukcija ,uputstvo na hrvatskom ,kako uopće započeti s radom u deftshipu??
Uopće nemam ideju kako započeti rad,budući nigdje nema nekog vođenja step by step,kroz program.pozdrav
Miric -
January 28, 2013 at 19:40 #36517
Hrvoje
ParticipantHi, Miric!
Pokušavam prebaciti linije iz AUTOCADA 2010 u delftship,no ne uspijevam.
I did not try this. Usually I export from DelftShip and import the file into CAD. The file is in “dxf” format.
Nadalje,da li ima neka instrukcija ,uputstvo na hrvatskom ,kako uopće započeti s radom u deftshipu??
Uopće nemam ideju kako započeti rad,budući nigdje nema nekog vođenja step by step,kroz program.
pozdrav
MiricThere is very good User’s Manual in Download area of this site. I started with it.
Kind regards, Hrvoje
-
-
AuthorPosts
- You must be logged in to reply to this topic.
Your account
Recent Topics
-
Modeling the 1907 U.S. Brigantine Galilee
by
Terrance Egolf
1 month ago -
install problems
by
tcurdt
1 month ago -
VCG and GM of Smit Rotterdam
by
DuncanH
1 month ago -
Revision/save history?
by
Jamie
1 month, 1 week ago -
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
3 months, 2 weeks ago -
Cylinder through curved deck
by
RuudN
3 months, 2 weeks ago -
Exporting table of offsets
by
Peter Mitchell
4 months, 2 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
4 months, 2 weeks ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
4 months, 3 weeks ago -
Deck Camber
by
patmat41959
4 months, 3 weeks ago