Agor-25 Research Vessel Atlantis

DELFTship forum General Questions Agor-25 Research Vessel Atlantis

Viewing 1 reply thread
  • Author
    Posts
    • #38636
      Joe Huntley
      Participant

      I was wanting to do a large model of the Research Vessel Atlantis for radio control.
      I have a profile view and some deck plans but nothing on the hull. I cant seem to get the hang of delftship as I am so used to doing solidworks with offset tables and the such. I am using version 8.06 the free version but cant seem to come up with anything useful.

      I was wondering of anyone that knows stuff about ship hulls could help me with this. the info I have on the ship is below:

      R/V Atlantis Specifications

      Built: 1997
      Length: 274 feet
      Draft: 19 feet (5.8 m)
      Displacement: 3,510 LT
      Range: 17,280 NM
      Laboratories: 3,517 sq. feet
      Speeds: 11.0 knots cruising
      Alvin Conversion: 1997
      Beam: 52.5 feet
      Gross Tons: 3,200 T
      Complement:
      Crew – 22
      Scientists – 24
      DSOG – 12
      SSSG Techs – 2
      Endurance: 60 days
      Fuel Capacity: 267,540 gallons
      Propulsion: Diesel-electric, azimuthing stern thrusters
      Bow Thruster: Azimuthing jet 1,180 SHP
      Ship Service Generators: Three 715 kw 600 VAC
      Portable Van Space: At least six 20 ft. vans
      Winches:
      Traction – 30,000′ .68″ EM or 9/16″ wire
      Hydro – 33,000′ 3-cond. EM or 1/4″ wire
      Heavy Equipment:
      Cranes – two @ 42,000 lbs. cap.
      HIAB cranes (2)
      Midships hydro boom
      Sewage System: Envirovac flushing system
      Ownership: Title held by U.S. Navy; operated under charter agreement with Office of Naval Research
      Other Features: Dynamic positioning system, ROV and submersible hangars, fully equipped machine shop, two rigid-hull inflatable rescue/work boats

      it is also listed as an AGOR-25 if that means anything

      Attachments:
    • #38637
      Joe Huntley
      Participant

      also how do you get delftship to export the offset tables. I can get it to do the line drawings but cannot find anything about offset tables

Viewing 1 reply thread
  • You must be logged in to reply to this topic.