Re:Visualizing two hulls
› DELFTship forum › Hull modeling › Visualizing two hulls › Re:Visualizing two hulls
May 5, 2010 at 12:14
#34082
Keymaster
Try the following:
- Go to the intersections window and press the “convert to markers” button to convert your stations to markers. You can do this for stations and buttocks too.
- Export the markers too a marker file. Use “Tools” => “Markers” => “Export markers” from the main menu to save to a .mrk file which contains all your marker information.
- Import this file in your other design using the “Tools” => “Markers” => “Import” command from the main menu. If the stations (and waterlines etc) in both designs are at the same locations then you can exactly see the differences between the two designs.
Your account
Recent Topics
-
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
2 months ago -
Cylinder through curved deck
by
RuudN
2 months ago -
Exporting table of offsets
by
Peter Mitchell
3 months ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
3 months ago -
install problems
by
tcurdt
3 months ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months, 1 week ago -
Deck Camber
by
patmat41959
3 months, 1 week ago -
Waterline
by
Mats Nyberg
4 months, 1 week ago -
CAD Interface
by
Peter Mitchell
4 months, 2 weeks ago -
Deck and Bulkhead layers changing Hydrostatics ?
by
orfoz
4 months, 3 weeks ago