Re:Selecting Faces and assigning to layers
› DELFTship forum › Hull modeling › Selecting Faces and assigning to layers › Re:Selecting Faces and assigning to layers
April 7, 2010 at 04:49
#34030
Participant
1, First, set up your layers in Layer Properties, which you have done.
2 Go to Display –>Interior Edges, you model will change into a series of different coloured fish nets, highlight the layer on your model by left clicking your mouse on the layer and assign the layer by the drop down arrow next to the Current Active Layer Window.
Mike
Your account
Recent Topics
-
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
1 month, 3 weeks ago -
Cylinder through curved deck
by
RuudN
1 month, 3 weeks ago -
Exporting table of offsets
by
Peter Mitchell
2 months, 3 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
2 months, 3 weeks ago -
install problems
by
tcurdt
2 months, 3 weeks ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months ago -
Deck Camber
by
patmat41959
3 months ago -
Waterline
by
Mats Nyberg
4 months ago -
CAD Interface
by
Peter Mitchell
4 months ago -
Deck and Bulkhead layers changing Hydrostatics ?
by
orfoz
4 months, 2 weeks ago