Re:Inclined stability capability
› DELFTship forum › Hydrostatics and stability › Inclined stability capability › Re:Inclined stability capability
August 4, 2009 at 11:10
#33668
Keymaster
You’ll need one of the extensions, depending on what you want to calculate exactly. The loadcases extension calculates the intact stability curve and compares it with the stability criteria. You can also use the crosscurves extension if you know the weight and initial trim of your vessel to create a stability curve yourself.
Your account
Recent Topics
-
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
2 months ago -
Cylinder through curved deck
by
RuudN
2 months ago -
Exporting table of offsets
by
Peter Mitchell
3 months ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
3 months ago -
install problems
by
tcurdt
3 months, 1 week ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months, 1 week ago -
Deck Camber
by
patmat41959
3 months, 1 week ago -
Waterline
by
Mats Nyberg
4 months, 1 week ago -
CAD Interface
by
Peter Mitchell
4 months, 2 weeks ago -
Deck and Bulkhead layers changing Hydrostatics ?
by
orfoz
4 months, 3 weeks ago