Re:How to shape an extruded surface ?
› DELFTship forum › Hull modeling › How to shape an extruded surface ? › Re:How to shape an extruded surface ?
March 4, 2009 at 15:05
#33540
Keymaster
The process is simple,
First insert edge from the top to the bottom, and also one at the aft part of the surface, just to keep your grid as regular as possible.
Then make the upper point a corner point so the surface makes a sharp turn.
See the image below for clarification.
Attachments:
Your account
Recent Topics
-
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
1 month, 3 weeks ago -
Cylinder through curved deck
by
RuudN
1 month, 3 weeks ago -
Exporting table of offsets
by
Peter Mitchell
2 months, 3 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
2 months, 3 weeks ago -
install problems
by
tcurdt
2 months, 3 weeks ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months ago -
Deck Camber
by
patmat41959
3 months ago -
Waterline
by
Mats Nyberg
4 months ago -
CAD Interface
by
Peter Mitchell
4 months ago -
Deck and Bulkhead layers changing Hydrostatics ?
by
orfoz
4 months, 2 weeks ago