Re:Hard chine classics for a complete CAD new boy
› DELFTship forum › Hull modeling › Hard chine classics for a complete CAD new boy › Re:Hard chine classics for a complete CAD new boy
July 20, 2010 at 05:43
#34178
Participant
Yes that is possible, I export from D’ship to an NC processor for my router and have done models of several boats, thin ply & aluminum.
The steps to get this done are not simply “point and click”. Many internal surfaces are not fully addressed by D’Ship so frames can be more work than hull panels.
There are work arounds for many tasks but D’Ship is not intended, at this time, as a fully integrated manufacturing (CAD/CAM) solution.
You will need to work with other CAD applications (in addition too D’Ship) to create the full set of outlines for the NC cutting you’re describing.
Cheers,
Kevin Morin
Your account
Recent Topics
-
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
1 month, 3 weeks ago -
Cylinder through curved deck
by
RuudN
1 month, 3 weeks ago -
Exporting table of offsets
by
Peter Mitchell
2 months, 3 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
2 months, 3 weeks ago -
install problems
by
tcurdt
2 months, 4 weeks ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months ago -
Deck Camber
by
patmat41959
3 months ago -
Waterline
by
Mats Nyberg
4 months ago -
CAD Interface
by
Peter Mitchell
4 months, 1 week ago -
Deck and Bulkhead layers changing Hydrostatics ?
by
orfoz
4 months, 2 weeks ago