Re:Cannot import VRML file
› DELFTship forum › Hull modeling › Cannot import VRML file › Re:Cannot import VRML file
January 22, 2010 at 12:10
#33916
Participant
This is what I could come up with so far in converting VRML 1.0 .wrl file to DelfShip’s(DS) .fbm format manually after importing it. See attached file.
DS allows me to delete edges, but will not allow to create it. I cannot calculate design hydrostatics too. It gives me error “You have to set mainparticulars first”. How can I do it? As I understand, all lines should be completed by control’s lines. But how to replace all lines by controle ones? [file name=9_4_VRML_1_v2.zip size=18558]http://www.delftship.net/delftship/media/kunena/attachments/legacy/files/9_4_VRML_1_v2.zip[/file]
Attachments:
Your account
Recent Topics
-
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
1 month, 3 weeks ago -
Cylinder through curved deck
by
RuudN
1 month, 3 weeks ago -
Exporting table of offsets
by
Peter Mitchell
2 months, 3 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
2 months, 3 weeks ago -
install problems
by
tcurdt
2 months, 4 weeks ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months ago -
Deck Camber
by
patmat41959
3 months ago -
Waterline
by
Mats Nyberg
4 months ago -
CAD Interface
by
Peter Mitchell
4 months, 1 week ago -
Deck and Bulkhead layers changing Hydrostatics ?
by
orfoz
4 months, 2 weeks ago