Re:Bilge with fixed radius to flat side and bottom
› DELFTship forum › Feature requests › Bilge with fixed radius to flat side and bottom › Re:Bilge with fixed radius to flat side and bottom
November 19, 2009 at 20:40
#33768
Keymaster
Dear Jeppe,
The best way to achieve this is to use a marker as a guide to the shape you are trying to create.
Take a look at the attached file.
I have used a cylinder here (from the tools menu) to model a 1m radius with 5 points. You can simply scale the coordinates with a factor of 1.5 for a 1.5 m. radius.
Another possibility is to use the same cylinder (use a multiple of 4 control points) and use only 1 quarter of the shape. [file name=Bilge_radius.fbm size=6698]http://www.delftship.net/delftship/media/kunena/attachments/legacy/files/Bilge_radius.fbm[/file]
Attachments:
Your account
Recent Topics
-
Revision/save history?
by
Jamie
5 minutes ago -
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
2 months ago -
Cylinder through curved deck
by
RuudN
2 months ago -
Exporting table of offsets
by
Peter Mitchell
3 months ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
3 months ago -
install problems
by
tcurdt
3 months, 1 week ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months, 1 week ago -
Deck Camber
by
patmat41959
3 months, 1 week ago -
Waterline
by
Mats Nyberg
4 months, 1 week ago -
CAD Interface
by
Peter Mitchell
4 months, 2 weeks ago