Re: transom and deck
› DELFTship forum › Hull modeling › transom and deck › Re: transom and deck
Hi Adriano,
In my Layers window, anything directly part of the hull is automatically symetrical and cannot be checked and made asymetrical. Other items brought into the design via create box, cylinder or keel/rudder wizard etc., can be checked as asymetrical.
How did you create your sails? Did you bring the in using Create Box, with the ‘Create New Layer’ checked or use a different method?
One other thing that I noticed. If you ultimately want an accurate sail area, I would remove control net from within the sails, leaving them with just the outline, as per a traditional sail plan.
I have a little spreadsheet routine to calculate CE over LCR, which I use outside DS
as a check.
When I get a moment I’ll have another look around and if I see something else I’ll let you know.
JayOh
Your account
Recent Topics
-
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
1 month, 3 weeks ago -
Cylinder through curved deck
by
RuudN
1 month, 3 weeks ago -
Exporting table of offsets
by
Peter Mitchell
2 months, 3 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
2 months, 3 weeks ago -
install problems
by
tcurdt
2 months, 3 weeks ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months ago -
Deck Camber
by
patmat41959
3 months ago -
Waterline
by
Mats Nyberg
4 months ago -
CAD Interface
by
Peter Mitchell
4 months ago -
Deck and Bulkhead layers changing Hydrostatics ?
by
orfoz
4 months, 2 weeks ago