Re: transom and deck
› DELFTship forum › Hull modeling › transom and deck › Re: transom and deck
September 15, 2011 at 03:30
#35133
Participant
When you have your delft model open, go to FILE –> SAVE AS down
the bottom of Save As window, left hand side you have SAVE AS TYPE
on the right side there is an arrow head click on it and all the versions will come up click on version 4.42 and save to the desk top so you can find it again, then attachment it to your post or send it to mike101@exemail.com.au
Your account
Recent Topics
-
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
1 month, 3 weeks ago -
Cylinder through curved deck
by
RuudN
1 month, 3 weeks ago -
Exporting table of offsets
by
Peter Mitchell
2 months, 3 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
2 months, 3 weeks ago -
install problems
by
tcurdt
2 months, 3 weeks ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months ago -
Deck Camber
by
patmat41959
3 months ago -
Waterline
by
Mats Nyberg
4 months ago -
CAD Interface
by
Peter Mitchell
4 months ago -
Deck and Bulkhead layers changing Hydrostatics ?
by
orfoz
4 months, 2 weeks ago