Re: Prismatic coefficient
› DELFTship forum › Hull modeling › Prismatic coefficient › Re: Prismatic coefficient
September 7, 2011 at 10:35
#35101
Keymaster
Delftship doesn’t use the max. cross section area. Instead it uses the cross section are of the midship section. For merchant ships this generally also is the max. cross section area. For yachts and boats this is not necessarily the case. Go to the project settings and modify the mid ship location so it matches the loacation of the max. cross section area.
Your account
Recent Topics
-
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
1 month, 3 weeks ago -
Cylinder through curved deck
by
RuudN
1 month, 3 weeks ago -
Exporting table of offsets
by
Peter Mitchell
2 months, 3 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
2 months, 3 weeks ago -
install problems
by
tcurdt
2 months, 4 weeks ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months ago -
Deck Camber
by
patmat41959
3 months ago -
Waterline
by
Mats Nyberg
4 months ago -
CAD Interface
by
Peter Mitchell
4 months, 1 week ago -
Deck and Bulkhead layers changing Hydrostatics ?
by
orfoz
4 months, 2 weeks ago