Re: Prismatic coefficient greater than 1.o
› DELFTship forum › Hydrostatics and stability › Prismatic coefficient greater than 1.o › Re: Prismatic coefficient greater than 1.o
August 8, 2012 at 17:05
#36148
Participant
Your midship location is placed at 8,544 ft.
the biggest section area seems to be at 3-4 ft (section area curve)
thats why it is bigger.
I guess your midship location has to be set up to the highest point of the area curve (3-4ft). Than the CP should be correct.
Your account
Recent Topics
-
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
2 months ago -
Cylinder through curved deck
by
RuudN
2 months ago -
Exporting table of offsets
by
Peter Mitchell
2 months, 4 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
3 months ago -
install problems
by
tcurdt
3 months ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months, 1 week ago -
Deck Camber
by
patmat41959
3 months, 1 week ago -
Waterline
by
Mats Nyberg
4 months, 1 week ago -
CAD Interface
by
Peter Mitchell
4 months, 2 weeks ago -
Deck and Bulkhead layers changing Hydrostatics ?
by
orfoz
4 months, 3 weeks ago