Re: Plate development problem in free Delftship 4.38.130
› DELFTship forum › Hull modeling › Plate development problem in free Delftship 4.38.130 › Re: Plate development problem in free Delftship 4.38.130
October 31, 2011 at 03:24
#35296
Participant
Thank you. I had tried a few things with creating a layer for each plate, but without succss. I will review the manual again and hopefully it will click this time. 🙂
If you do not see a post from me by monday evening, then I’m still working this through, and anyone can feel free to perhaps word the solution in another way, since I’m not quite clear on *highlight each plate to its layer*. Getting to it now. 🙂
Your account
Recent Topics
-
Modeling the 1907 U.S. Brigantine Galilee
by
Terrance Egolf
1 month ago -
install problems
by
tcurdt
1 month, 1 week ago -
VCG and GM of Smit Rotterdam
by
DuncanH
1 month, 1 week ago -
Revision/save history?
by
Jamie
1 month, 1 week ago -
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
3 months, 2 weeks ago -
Cylinder through curved deck
by
RuudN
3 months, 2 weeks ago -
Exporting table of offsets
by
Peter Mitchell
4 months, 2 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
4 months, 3 weeks ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
4 months, 4 weeks ago -
Deck Camber
by
patmat41959
4 months, 4 weeks ago