Re: lcb midship and lwl

DELFTship forum Hydrostatics and stability lcb midship and lwl Re: lcb midship and lwl

#34590
Jesus Cruz
Participant

Yes, you can manually input the data just go to the Project settings menu, in the tag “Main dimensions”, there is a c`hecked square “Default at 0.5*L”, if that square is checked it will automatically set the midship section at half the Lenght that you indicated in the box above indicated as “length”, if it is not checked you can manually indicate the location of the midship section by inserting the value directlly in the box indicated as “Midship location”

Regards