Re: Is it just my system or a bug?
› DELFTship forum › Hydrostatics and stability › Is it just my system or a bug? › Re: Is it just my system or a bug?
One other question…when working with an angled bulkhead I find the easiest way to get the dimensions is to rotate the boat to the desired angle and run a station through it. I can export the offsets from 2.6 and get the right numbers for the knuckles but it doesn’t work in Delftship. Is there a different method of getting the offsets for the stations in this version?
Actually…going back and checking…I can’t get any offsets from the hull at all. I have the option to export but all the stations are zeros.
please see attached .txt [file name=Emerald_alternateDelft_1_26.txt size=17970]http://www.delftship.net/delftship/media/kunena/attachments/legacy/files/Emerald_alternateDelft_1_26.txt[/file]
Your account
Recent Topics
-
Revision/save history?
by
Jamie
10 hours, 50 minutes ago -
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
2 months ago -
Cylinder through curved deck
by
RuudN
2 months ago -
Exporting table of offsets
by
Peter Mitchell
3 months ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
3 months ago -
install problems
by
tcurdt
3 months, 1 week ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months, 1 week ago -
Deck Camber
by
patmat41959
3 months, 1 week ago -
Waterline
by
Mats Nyberg
4 months, 1 week ago -
CAD Interface
by
Peter Mitchell
4 months, 2 weeks ago