Re: Insert Plane… Makes My Model Less Developable… Maybe v2.6
› DELFTship forum › Hull modeling › Insert Plane… Makes My Model Less Developable… Maybe v2.6 › Re: Insert Plane… Makes My Model Less Developable… Maybe v2.6
Delftship 4 uses exactly the same surface as version 2.6, so geomatry compatibility shouldn’t be the problem. Inserting new control points however changes the geometry, so you might need to adjust the new control points to make the surface developable again.
If the surface looks red in the developability shading mode then you can be sure the surface is indeed not developable due to compound surface curvature.
I’m also working a a new GUI for the plate developments which visualizes the stress or compression in the unfolded surfaces. If you want me to I can test your model and send post the resulting image here.
Your account
Recent Topics

Modeling the 1907 U.S. Brigantine Galilee
by Terrance Egolf
1 month ago

install problems
by tcurdt
1 month, 1 week ago

VCG and GM of Smit Rotterdam
by DuncanH
1 month, 1 week ago

Revision/save history?
by Jamie
1 month, 1 week ago

Create deck plane as the intections at z=xxx with the hull
by Pidgee
3 months, 2 weeks ago

Cylinder through curved deck
by RuudN
3 months, 2 weeks ago

Exporting table of offsets
by Peter Mitchell
4 months, 2 weeks ago

Modelling a flat bottom chine tug hull (WWII TID)
by Paul
4 months, 3 weeks ago

Correct Hull Shape from Existing Lines Plan
by patmat41959
4 months, 4 weeks ago

Deck Camber
by patmat41959
4 months, 4 weeks ago