Re: How to get perfect/correct interior edges
› DELFTship forum › Hull modeling › How to get perfect/correct interior edges › Re: How to get perfect/correct interior edges
March 27, 2013 at 22:15
#36627
Participant
I am not sure, because the image of course do not let me guess about your procedure.
But if you have created a face from selected points, not taking care of the correct order, the result couild be those crossed edges with no common point, in effect a double overlapping face in the same plane.
Let me know.
Jurgen.
Your account
Recent Topics
-
Revision/save history?
by
Jamie
1 hour, 25 minutes ago -
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
2 months ago -
Cylinder through curved deck
by
RuudN
2 months ago -
Exporting table of offsets
by
Peter Mitchell
3 months ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
3 months ago -
install problems
by
tcurdt
3 months, 1 week ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months, 1 week ago -
Deck Camber
by
patmat41959
3 months, 1 week ago -
Waterline
by
Mats Nyberg
4 months, 1 week ago -
CAD Interface
by
Peter Mitchell
4 months, 2 weeks ago