Re: Export the Faces
› DELFTship forum › Feature requests › Export the Faces › Re: Export the Faces
August 10, 2010 at 11:28
#34204
Participant
The use is
1. list of corner points:
point_number x y z
point_number x y z
…
2. list of panels i.e. the numbers of the corner:
number_of_corners (i,e. 3,4,5,6)
point_number point_number…
number_of_corners (i,e. 3,4,5,6)
point_number point_number…
But of course any other listing from which the above information can be generated is useful.
The number of corners can be from 3 to 6.
The paneling should extend beyond the waterline. The actual dynamic waterline including the effect of waves and trim and sinkage is found during the calculation.
jensenigu
Your account
Recent Topics
-
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
1 month, 3 weeks ago -
Cylinder through curved deck
by
RuudN
1 month, 3 weeks ago -
Exporting table of offsets
by
Peter Mitchell
2 months, 3 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
2 months, 3 weeks ago -
install problems
by
tcurdt
2 months, 3 weeks ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months ago -
Deck Camber
by
patmat41959
3 months ago -
Waterline
by
Mats Nyberg
4 months ago -
CAD Interface
by
Peter Mitchell
4 months ago -
Deck and Bulkhead layers changing Hydrostatics ?
by
orfoz
4 months, 2 weeks ago