Re: Displacement Volume in v4.18
› DELFTship forum › Feature requests › Displacement Volume in v4.18 › Re: Displacement Volume in v4.18
October 2, 2010 at 17:55
#34328
Participant
Hi Bob,
I had another go at your boat but couldn’t get far so I did a design for you its a bit rough but you might find some use for it, even if its only good as a reference, remember you can scale it up or down to your size. It has no leak points and all the hydrostatics are there.
Mike [file name=Boat.fbm size=34355]http://www.delftship.net/delftship/media/kunena/attachments/legacy/files/Boat.fbm[/file]
Attachments:
Your account
Recent Topics
-
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
1 month, 3 weeks ago -
Cylinder through curved deck
by
RuudN
1 month, 3 weeks ago -
Exporting table of offsets
by
Peter Mitchell
2 months, 3 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
2 months, 3 weeks ago -
install problems
by
tcurdt
2 months, 4 weeks ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months ago -
Deck Camber
by
patmat41959
3 months ago -
Waterline
by
Mats Nyberg
4 months ago -
CAD Interface
by
Peter Mitchell
4 months, 1 week ago -
Deck and Bulkhead layers changing Hydrostatics ?
by
orfoz
4 months, 2 weeks ago