Re: Displacement Volume in v4.18
› DELFTship forum › Feature requests › Displacement Volume in v4.18 › Re: Displacement Volume in v4.18
September 21, 2010 at 08:45
#34291
Participant
Hi Phillip, remember that model of your boat I sent you thats the correct way to avoid leak points between the hull and deck + transom. 4.18 as a niffty tool to extrude a deck and transom in one go,( under Edge Editing, 2nd icon, deck extrude edges along an arc) just highlight the sheer between the control points (not the control points)from the bow all the way to the transom CL insert some data for curature and hey preso, then you just have to mould it into shape, remember the shortest distance and weight betwwen 2 points is a straight line, although not as pretty as a curved one. Or just use the model I sent you.
Mike
Your account
Recent Topics
-
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
1 month, 3 weeks ago -
Cylinder through curved deck
by
RuudN
1 month, 3 weeks ago -
Exporting table of offsets
by
Peter Mitchell
2 months, 3 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
2 months, 3 weeks ago -
install problems
by
tcurdt
2 months, 3 weeks ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months ago -
Deck Camber
by
patmat41959
3 months ago -
Waterline
by
Mats Nyberg
4 months ago -
CAD Interface
by
Peter Mitchell
4 months ago -
Deck and Bulkhead layers changing Hydrostatics ?
by
orfoz
4 months, 2 weeks ago