Re: Displacement Volume in v4.18
› DELFTship forum › Feature requests › Displacement Volume in v4.18 › Re: Displacement Volume in v4.18
September 20, 2010 at 23:36
#34290
Participant
I removed the Foredeck and Cockpit (both of which were developed as “Parts” – to permit me to try different combinations when fitting electronics (this is a Radio Controlled Boat).
The Hydrostatic Report is now accurate! 🙂 I still need to shave 0.191 tonnes of displacement, but this is do-able with some modifications to the appendages B) .
I’ll worry myself with re-attaching the Foredeck & Cockpit after I get the displacement “right” (I’ll have to work on that a bit too) :unsure:
Thank you for all of your help!!!!!!!!!!! 🙂
S/F, Phil
Your account
Recent Topics
-
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
1 month, 3 weeks ago -
Cylinder through curved deck
by
RuudN
1 month, 3 weeks ago -
Exporting table of offsets
by
Peter Mitchell
2 months, 3 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
2 months, 3 weeks ago -
install problems
by
tcurdt
2 months, 4 weeks ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months ago -
Deck Camber
by
patmat41959
3 months ago -
Waterline
by
Mats Nyberg
4 months ago -
CAD Interface
by
Peter Mitchell
4 months, 1 week ago -
Deck and Bulkhead layers changing Hydrostatics ?
by
orfoz
4 months, 2 weeks ago