Re: Design Hydrostatic Report
› DELFTship forum › Hydrostatics and stability › Design Hydrostatic Report › Re: Design Hydrostatic Report
Hi Mike,
Thanks for the input.
So to recap, what you’re saying is that anything inside the hull, such as tanks, batteries, the cabin, the floor etc. doesn’t need the hydrostatic box ticked, just the symmetric one. That is provided the thickness and density are input.
As you can see I’m pretty much a layman as far as boat design is concerned, but I’m trying………
When I saw hydrostatic I assumed hydrostatic pressure exerted on the water by the boat. Since in reservoir engineering which was my forte, one calculated the hydrostatic pressure at the bottom of a wellbore with pipe and kill fluid in place.
Anyway, thank you kindly for the information and the patience.
Your account
Recent Topics
-
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
2 months ago -
Cylinder through curved deck
by
RuudN
2 months ago -
Exporting table of offsets
by
Peter Mitchell
2 months, 4 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
3 months ago -
install problems
by
tcurdt
3 months ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months, 1 week ago -
Deck Camber
by
patmat41959
3 months, 1 week ago -
Waterline
by
Mats Nyberg
4 months, 1 week ago -
CAD Interface
by
Peter Mitchell
4 months, 2 weeks ago -
Deck and Bulkhead layers changing Hydrostatics ?
by
orfoz
4 months, 3 weeks ago