Re: Design Hydrostatic Report
› DELFTship forum › Hydrostatics and stability › Design Hydrostatic Report › Re: Design Hydrostatic Report
October 8, 2012 at 16:59
#36303
Participant
Hi Clansman,
as I said before its been a long time since I fiddled around in that area as I have the Tanks module and the Load Case module to do my tanks and balance the hull. I cant see why you need the hydro for your tanks as they are internal and they make up part of the overall displacement. What is important is the weight of the tanks, contents and their centre of gravity but with out the Load Case module you will have to balance your vessel mathematically.
Your account
Recent Topics
-
Revision/save history?
by
Jamie
1 hour, 15 minutes ago -
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
2 months ago -
Cylinder through curved deck
by
RuudN
2 months ago -
Exporting table of offsets
by
Peter Mitchell
3 months ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
3 months ago -
install problems
by
tcurdt
3 months, 1 week ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months, 1 week ago -
Deck Camber
by
patmat41959
3 months, 1 week ago -
Waterline
by
Mats Nyberg
4 months, 1 week ago -
CAD Interface
by
Peter Mitchell
4 months, 2 weeks ago