Re: deck structures
› DELFTship forum › Hull modeling › deck structures › Re: deck structures
April 15, 2012 at 10:54
#35862

Participant
Hi Adriano!
Try to collapse the edge you don’t like. After that you will have a hole in the plating. Than add new face to close this hole. If you don’t like the result click “undo” button and try with the other edge. If the hole is not closed as you want, try to experiment by selecting the control points in different order.
In the Download area under Tutorials you will find “Leak points”. In this tutorial you will see how to get rid of unwanted edges (between other things).
Have a fun!
🙂
Kind regards, Hrvoje
Your account
Recent Topics
-
Revision/save history?
by
Jamie
1 hour, 47 minutes ago -
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
2 months ago -
Cylinder through curved deck
by
RuudN
2 months ago -
Exporting table of offsets
by
Peter Mitchell
3 months ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
3 months ago -
install problems
by
tcurdt
3 months, 1 week ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months, 1 week ago -
Deck Camber
by
patmat41959
3 months, 1 week ago -
Waterline
by
Mats Nyberg
4 months, 1 week ago -
CAD Interface
by
Peter Mitchell
4 months, 2 weeks ago