Re: deck structures
› DELFTship forum › Hull modeling › deck structures › Re: deck structures
April 16, 2012 at 23:32
#35895

Participant
As I can see, and maybe understand 😉 , you have the problem on this location:
and you want to have something like this?
If so, then add new face between those three points from upper picture.
Then add again one new face between three selected points
delete selected edge
collapse selected point
delete edge:
collapse point:
insert new face:
and you will have this after making edges crease:
Kind regards, Hrvoje
Your account
Recent Topics
-
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
1 month, 3 weeks ago -
Cylinder through curved deck
by
RuudN
1 month, 3 weeks ago -
Exporting table of offsets
by
Peter Mitchell
2 months, 3 weeks ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
2 months, 3 weeks ago -
install problems
by
tcurdt
2 months, 3 weeks ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months ago -
Deck Camber
by
patmat41959
3 months ago -
Waterline
by
Mats Nyberg
4 months ago -
CAD Interface
by
Peter Mitchell
4 months ago -
Deck and Bulkhead layers changing Hydrostatics ?
by
orfoz
4 months, 2 weeks ago