Re: Boat Structure Design
› DELFTship forum › Hull modeling › Boat Structure Design › Re: Boat Structure Design
October 31, 2012 at 08:01
#36362
Participant
the short answer should be NO, there is not,you have a module that gives you the bending moments and shear force for a given load case, or many load cases if is the case, the ship weigth and C.G. location has to be given to the software, usually calculated with other means.
Your account
Recent Topics
-
Revision/save history?
by
Jamie
1 hour, 30 minutes ago -
Create deck plane as the intections at z=xxx with the hull
by
Pidgee
2 months ago -
Cylinder through curved deck
by
RuudN
2 months ago -
Exporting table of offsets
by
Peter Mitchell
3 months ago -
Modelling a flat bottom chine tug hull (WWII TID)
by
Paul
3 months ago -
install problems
by
tcurdt
3 months, 1 week ago -
Correct Hull Shape from Existing Lines Plan
by
patmat41959
3 months, 1 week ago -
Deck Camber
by
patmat41959
3 months, 1 week ago -
Waterline
by
Mats Nyberg
4 months, 1 week ago -
CAD Interface
by
Peter Mitchell
4 months, 2 weeks ago